Rasps and Hand Files

Supplied with a 300 mm Sandflex 24 TPI bi-metal blade. Blade tensioning mechanism with blade retaining spring for easy blade change. Very high blade tension for straight and accurate cuts. Alternative 55 degree blade mounting pins for flush cutting...

For filing holes, large fillets and concave surfaces. Shape: tapered towards the point. 4" and 6" fully pointed, 8" and longer semi-pointed. Double cut.

For filing holes, large fillets and concave surfaces. Shape: tapered towards the point. 4" and 6" fully pointed, 8" and longer semi-pointed. Double cut.

For filing holes, large fillets and concave surfaces. Shape: tapered towards the point. 4" and 6" fully pointed, 8" and longer semi-pointed. Double cut.

?ò Regular square section, tapers in width toward the point ?ò Two square edges, single cut on both sides and edges ?ò APPLICATION: General purpose used for sharpening saws, axes, farm tools and other edged tools, also used in lathe work, draw filing...

For filing grooves, rectangular holes, inside corners and for fine-adjustment of cutting tools. Shape, surfaces tapered towards tip. Double cut.

For filing grooves, rectangular holes, inside corners and for fine-adjustment of cutting tools. Shape, surfaces tapered towards tip. Double cut.

Cabinet scraper for carpentry work such as smoothing wood surfaces, levelling between finish coats and removing old paint. Blade of cold-rolled, hardened and tempered chrome-nickel steel. White plastic edge protector. Unitary hangable plastic bag.

To work in high-alloy tool steels for the sharpening of heavy implements. For filing flat surfaces, sharp corners and shoulders as well as for deburring. Shape: edges tapered towards the tip, surfaces parallel. Surfaces double cut, edges single cut...

For filing concave and flat surfaces and large holes. Suitable for deburring work. Shape: edges and surfaces tapered towards tip. Double cut surfaces, uncut edges. Tapered shape for easier access into angles and corners.

?ò Regular square section, tapers off in both width and thickness toward the point ?ò Double cut on both sides, single cut on edges ?ò APPLICATION: General purpose, used for smoothing surfaces and rapidly removing sharp edges and burs on iron and steel...

To work in high-alloy tool steels for the sharpening of heavy implements. For filing flat surfaces, sharp corners and shoulders as well as for deburring. Shape: edges tapered towards the tip, surfaces parallel. Surfaces double cut, edges single cut...