Automotive Specialized Tools

- 1/4" "U" Notch Tip - Length 8-3/4" (222.2mm)

- 1995 – 1996 Ford™ Mustang 1/4" fuel pump return line

- Multi-use, flexible-shaft, 1/4" drive socket driver - 12" Overall length shaft will tighten or loosen hex head screws on gear type hose clamps and other applications in even the most hard to get at places - 1/4" drive end allows operator to attach...

- Inserts bearing race and seals quickly, straight and without damaging both race and axle housings on the first try - Collars fit most standard wheel bearing sizes - Comes in convenient blow mould storage case - Set includes: - 9 Disc Sizes: 1.565,...

- This master fuel line quick disconnect tool set broadens the applications of disconnecting fittings and spring lock couplings on fuel, filter cooler and transmission oil lines - Fuel line disconnects are colour coded anodized aluminum for easy...

- Kit Includes : H3662-10 Angled clip panel remover H3662-11 Flat clip panel remover H3662-12 Panel remover H3662-13 Sharp panel remover H3362-19 Wide type remover H3662-14 Straight panel remover H3662-15 Clip panel remover H3662-16 Pull type remover...

- Fits oil drain plugs on most domestic, European and Asian vehicles - Great for oil change professionals - Bright-finished Chrome Vanadium steel sockets comes on a metal clip rail

- Includes most popular size drivers for proper installation of seals, bearings, bushings - Ensures even distribution of force to all areas and prevents cocking - Comes in convenient blow mould storage case - Set includes: - 12 Drivers: 5/8, 3/4,...

- Separates quick connect fittings from transmission, radiator oil cooler and power steering lines - Kit includes, Ford™/GM quick disconnect coupler tool and Ford™ oil cooler line disconnect tool - Applications: - Ford™ EFI fuel lines with hair pin...

- For use on all brake and fuel hose lines - Special rounded edges ensure no damage to lines or internal reinforcements - Lightweight and non-conductive - Three sizes for use on most jobs - Kit includes: (one of each) - H3140 Range: 1/4" - 7/16" (6...

- Pulls out 4WD spindles for lubricating the inner needle bearing and front wheel alignment - Fits common 1/2 and 3/4 ton 4WD pickup spindles - 3 step design fits 1-1/2", 1-5/8" and 2" spindles - Use with 1/2" - 20 or 5/8-18 thread slide hammer

- 1990 – current Ford® Aerostar, Explorer, Bronco with 3/8" fuel lines - 1991 – current Ford® E & F series trucks with 3/8" fuel lines - 1992 – current Ford® Ranger with 3/8" fuel lines - 1994 – 1997 Dodge® Ram V6 & V8 trucks with 3/8" cooler lines -...

- Nickel Chrome plated finish for corrosion resistance - Extra long for maximum reach

- Nickel Chrome plated finish for corrosion resistance - Extra long for maximum reach

- 1990 – current Ford® Aerostar, Explorer, Bronco with 5/16" fuel lines - 1991 – current Ford® E & F series trucks with 5/16" fuel lines - 1992 – current Ford® Ranger with 5/16" fuel lines - 1992 – current GM® with 5/16" fuel lines

- 5/16" "U" Notch Tip - Length 8-3/4" (222.2mm)

- Exclusive ergonomic handle for maximum grip - Premium grade Chrome Vanadium steel shafts - Heat treated for maximum strength - Heavy duty professional quality

- Exclusive ergonomic handle for maximum grip - Premium grade Chrome Vanadium steel shafts - Heat treated for maximum strength - Heavy duty professional quality

- Exclusive ergonomic handle for maximum grip - Premium grade Chrome Vanadium steel shafts - Heat treated for maximum strength - Heavy duty professional quality

- Exclusive ergonomic handle for maximum grip - Premium grade Chrome Vanadium steel shafts - Heat treated for maximum strength - Heavy duty professional quality

- Exclusive ergonomic handle for maximum grip - Premium grade Chrome Vanadium steel shafts - Heat treated for maximum strength - Heavy duty professional quality

- Removes and installs oxygen sensors and vacuum switches on computerized engine control vehicles - 3/8" drive x 7/8" hex socket with cut-away slot provides extra clearance for oxygen sensor wires during use

- Exclusive ergonomic handle for maximum grip - Premium grade Chrome Vanadium steel shafts - Heat treated for maximum strength - Heavy duty professional quality

- Exclusive ergonomic handle for maximum grip - Premium grade Chrome Vanadium steel shafts - Heat treated for maximum strength - Heavy duty professional quality

- Exclusive ergonomic handle for maximum grip - Premium grade Chrome Vanadium steel shafts - Heat treated for maximum strength - Heavy duty professional quality

- Exclusive ergonomic handle for maximum grip - Premium grade Chrome Vanadium steel shafts - Heat treated for maximum strength - Heavy duty professional quality

- Exclusive ergonomic handle for maximum grip - Premium grade Chrome Vanadium steel shafts - Heat treated for maximum strength - Heavy duty professional quality

- Angled clip panel remover

- Designed to protect against plug wire and boot separation. - Handle and jaws are vinyl coated to insure complete insulation and non slip grip. - Overall length: 9-3/4"

- 3 stone adjustable tensions - Designed for fast accurate deglazing of cylinders - Operated by any 1/4" - 1/2" electric drill - Powerful arm design keeps the abrasives accurately in line - Spring tension adjusting nut for positive cutting action at...

- Clip panel remover

- Designed to service most cars with overhead valves and newer vehicles with confined areas under the hood - The knob is removable exposing a 5/8" hex post allowing the technician to operate the tool with a 5/8" wrench or socket - The components are...

- Ford® CFI fuel lines with hair pin connectors - Universal for radiator to transmission oil cooler lines - 1987 and later model Olds® Tornado; Buick® Riviere and Reatta; Cadillac® Eldorado, Seville and Concours; 1989 and later Model GM® 1/2, 3/4 & 1...

- 1990 – current Ford® Ranger and Explorer with 4.0 Liter, 6 cylinder engines

H3355 - Ford® vehicles with AXOD, AOD, or ATX transmission H3359 - Ford® Taurus and Escort oil cooler lines on AXOD and ATX transmission

- Flat clip panel remover

- Designed for use on flat band style hose clamps - 24” heavy duty flexible shaft allows access to clamps in confined or hard to reach areas - Locking mechanism holds clamp open for easy removal and installation - Range 0 – 2-1/16” (0-53mm) - Overall...

H3355 - Ford® vehicles with AXOD, AOD, or ATX transmission H3359 - Ford® Taurus and Escort oil cooler lines on AXOD and ATX transmission

- Easily releases spring lock fittings on fuel lines - Fits 5/16” and 3/8” fittings - Chrome plated tool resists corrosion

- Releases heater line quick connect fitting from engine block and thermostat housing - 1991 – current GM 3.1L / 3.4L & 3800 engines