Gray Tools
Gray Tools Shoulder Pattern Eye Bolt 1/2"-13 X 6" Extra Long Shank - (GRTBS16XL)
(No reviews yet)
Write a Review
- SKU:
- BS16XL
Description
Never apply loads greater than rated capacity to any eyebolt. Load should never be applied at more than a 45 degree angle from the bolt centreline. The rated capacity is reduced to 25% when the load is applied at a 45 degree angle to the bolt centreline.
View AllClose
Additional Information
Diameter: |
1/2 in |
Thread: |
Coarse Thread |
Finish: |
Bare Metal |
Length: |
6 in |
Grade: |
Grade 5 |
Style: |
Shoulder |
Type: |
Imperial |
Capacity: |
2600 lbs |
Overall Length: |
8-15/32 in |
I.D. Eye: |
1-3/16 in |
O.D. Eye: |
2-1/8 in |
Related Products
Related Products
Gray Tools Shoulder Pattern Eye Bolt 3/8"-16 X 4-1/2" Extra Long Shank - (GRTBS12XL)
Gray Tools
Never apply loads greater than rated capacity to any eyebolt. Load should never be applied at more than a 45 degree angle from the bolt centreline. The rated capacity is reduced to 25% when the load...
Gray Tools Shoulder Pattern Eye Bolt M10 X 1.5 X 35 mm Shank - (GRTBS10M)
Gray Tools
Never apply loads greater than rated capacity to any eyebolt. Load should never be applied at more than a 45 degree angle from the bolt centreline. The rated capacity is reduced to 25% when the load...
Gray Tools Shoulder Pattern Eye Bolt M24 X 3.0 X 63.5 mm Shank - (GRTBS24M)
Gray Tools
Never apply loads greater than rated capacity to any eyebolt. Load should never be applied at more than a 45 degree angle from the bolt centreline. The rated capacity is reduced to 25% when the load...
Gray Tools Shoulder Pattern Eye Bolt M12 X 1.75 X 38 mm Shank - (GRTBS12M)
Gray Tools
Never apply loads greater than rated capacity to any eyebolt. Load should never be applied at more than a 45 degree angle from the bolt centreline. The rated capacity is reduced to 25% when the load...
Gray Tools Shoulder Pattern Eye Bolt M8 X 1.25 X 31.7 mm Shank - (GRTBS8M)
Gray Tools
Never apply loads greater than rated capacity to any eyebolt. Load should never be applied at more than a 45 degree angle from the bolt centreline. The rated capacity is reduced to 25% when the load...