Adhesive Primers and Activators

Decreases the set-up time of Loctite threadlockers and increases breakaway torque on most fastener surfaces. Allows cold weather application. Contains no ozone depleting compounds. Applications: Use with Loctite threadlockers, thread sealants and...

7387 DEPEND ACTIVATOR 946 - (LC18862)

Loctite SF 7452 is transparent, light amber, cure-speed accelerator for the increased cure speed of Loctite cyanoacrylate adhesives. It can be either pre- or post-applied. It is especially suited for post-application on cyanoacrylate adhesive to ensure...

Loctite SF 7387 is a yellow to amber, transparent liquid substituted dihydropyridine activator containing the solvents n-Heptane and isopropanol. It is designed for Loctite toughened adhesives to initiate the cure of acrylic adhesives.

3M Tape Primer 94 is an adhesion promoter for use in conjunction with 3M VHB Tape. This tape primer can be used on many plastic, rubber, painted and bare metal substrates.

18396 - LOCTITE SF 770 Primer Adhesion Promoter (Heptane) - 1.75 fl. oz. Glass Bottle

BIGFOOT PRIMER SEALER 1G - (LC94142)

Loctite 382 is a transparent, colourless, general purpose, ethyl-based instant adhesive gel with a fixture time of 20 - 40 seconds. It is suitable for rubbers and metals and also suitable for plastics and polyolefins with Primer Loctite SF 770 or Loctite...

Loctite SF 7471 is transparent, yellow to amber liquid activator used where increased cure speed of Loctite anaerobic products is required. It is especially recommended for applications with passive metals or inert surfaces and with large bond gaps...

Loctite SF 7452 is transparent, light amber, cure-speed accelerator for the increased cure speed of Loctite cyanoacrylate adhesives. It can be either pre- or post-applied. It is especially suited for post-application on cyanoacrylate adhesive to ensure...

Loctite SF 7471 is transparent, yellow to amber liquid activator used where increased cure speed of Loctite anaerobic products is required. It is especially recommended for applications with passive metals or inert surfaces and with large bond gaps...

Loctite SF 7649 is designed to promote the curing speed of Loctite anaerobic adhesives and sealants without any significant loss of joint strength. It is especially recommended for applications with passive metals or inert surfaces and with large bond...