Cimpulse 33MP Cutting Fluid / 19L PAIL

APPLICATION
CIMPULSE 33MP is an oil free, multi-purpose, moderate-duty fluid for machining and grinding. It
offers high performance without the use of traditional extreme pressure lubricants and is
recommended for turning, drilling, milling, reaming, boring, tapping, and grinding of most metals.
Not recommended for magnesium alloys.

FEATURES & BENEFITS
• For all metals and all operations
• Excellent foam control
• Rejects oil
• Chlorine-free
• Does not contain DCHA

RECOMMENDED STARTING DILUTIONS:
CIMPULSE 33MP is to be mixed with water for use. Always add concentrate to water. Fluid may be
more difficult to mix when water temperature is cold. Add no materials to the concentrate or mix
unless approved by CIMCOOL®.

Machining and Grinding: 5% to 15% (1:19 to 1:6)

CONCENTRATION:
The Refractometer Factor is 2.5

TYPICAL PHYSICAL AND CHEMICAL PROPERTIES:
Physical State: Liquid Appearance and Odour: Cloudy/Chemical
Solubility in water: 100% miscible Weight, lb./gal, 60°F (15.6°C): 8.8
Viscosity (SUS) @ 100°F (37.8°C): 40 Flash Point: SEE MSDS
pH Concentrate: 7.9 pH Mix 5%, Typical: 7.6
Sulfur, wt.%: 0.0 Chlorine/Chloride, wt.%: 0.0/<50ppm
Siloxanes: No

HANDLING and STORAGE:
If frozen, product separates. Thaw completely at room temperature and stir thoroughly. Inside storage is
recommended.